Program Guide

Program Overview

Time Table (Oral Session)

Instructions for Presenters

Errata in ICFPE2016 Program Guide
​*​Program Guide on the website has already corrected.

Keynote Speaker

Prof. Paul Heremans

Prof. Paul Heremans

Director at Holst Centre
IMEC Fellow
Professor at KU Leuven

"Flexible a-IGZO Thin-Film Transistors
and Applications in Thin-Film
Integrated Circuits"

Date / Time

September 6 (Tue) 9:30 - 10:30

Plenary Speakers

Dr. Yoneharu Takubo

Mr. Yoneharu Takubo

CTO (Chief Technology Officer), JOLED Inc.

"The strategy of JOLED to challenge innovation"

Date / Time

September 7 (Wed) 9:30 - 10:30

Dr. Jupiter Hu

Deputy General Director, Industrial Technology Research Institute (ITRI)

"Flexible electronics in ITRI"

Date / Time

September 7 (Wed) 11:00 - 12:00

Dr. Akira Yoshino

Dr. Akira Yoshino

Advisor, Asahi Kasei Corp.
President, Lithium Ion Battery
Technology and Evaluation Center (LIBTEC)

"Lithium Ion Battery - Current, Past and Future -"

Date / Time

September 8 (Thu) 9:30 - 10:30

Dr. Akira Yoshino

Dr. Melissa E. Grupen-Shemansky

CTO, Flexible Electronics & Advanced Packaging
SEMI FlexTech

"Flexible Hybrid Electronics Opportunities and Ecosystem Development"

Date / Time

September 6 (Tue) 11:00-12:00

Invited Speakers

Session 1 "Flexible & Printed Displays"

Yoshihide FujisakiNHK (Japan)

Invited Speakers

Mr. Yoshiharu Hirakata

Mr. Yoshiharu Hirakata

Advanced Film Device Inc. (Japan)

"High-Resolution Flexible OLED Display using CAAC-OS"

Dr. Chen-Chu Tsai


Display Technology Center (DTC)
Industrial Technology Research Institute (ITRI) (Taiwan)

"Ultrathin Foldable AMOLED with On-cell Touch Panel"

Dr. Manabu Ito

Toppan Printing Co., Ltd. (Japan)

"Printing Technologies for Flexible Organic TFT Array"

Session 2 "Printed and Flexible Integrated Circuits"

Romain GwozieckiCEA Liten (France)

Invited Speakers

Dr. Gregory L Whiting

Google[X] (USA)

"Hybrid Printed Sensor Systems"

Prof. Paul Heremans

Director at Holst Centre
IMEC Fellow
Professor at KU Leuven

"High-performance single-crystal organic transistors on flex"

Session 3 "Fine Line Process & Equipment"

Jupiter HuIndustrial Technology Research Institute (ITRI) (Taiwan)
Cheng-Yao LoNational Tsing Hua University (Taiwan)

Invited Speakers

Mr. Satoru Kuramochi

Dai Nippon Printing Co., Ltd. (Japan)

"Technology Trend of Fine Print Circuit Advances and Glass Substrate for Advanced Package"

Dr. Cheng-Yi Shih

Industrial Technology Research Institute (ITRI) (Taiwan)

"Roll-to-Roll Fine Line Printing Solution for Flexible Electronics"

Session 4 "OLED Lighting"

Yong-Jin PuYamagata University (Japan)

Invited Speakers

Prof. Junji Kido

Yamagata University (Japan)

"Printed OLEDs for Displays and Lighting"

Prof. Sung Min Cho


Sungkyunkwan University (Korea)

"Roll-to-roll Processes for Flexible OLED Lighting"

Session 5 "Hybrid Integration & Applications"

Jukka HastVTT Technical Research Centre of Finland Ltd. (Finland)
Melissa E. Grupen-ShemanskyCTO, Flexible Electronics & Advanced Packaging SEMI FlexTech(USA)

Invited Speakers

Prof. Matti Mäntysalo

Tampere University of Technology (Finland)

"Integrating Printed and Silicon Electronics"

Session 6 "R2R Process & Equipment"

Gyoujin ChoSunchon University (Korea)

Invited Speakers

Prof. Kee-Hyun Shin

Toba Co., Ltd & Konkuk University (Korea)

"Manufacturing of Vitamin D Films using a Roll-to-Roll Coating Process"

Prof. Jukka Hast

VTT Technical Research Centre of Finland Ltd. (Finland)

"Roll-to-Roll Printed Large Area TOLED Modules"

Session 7 "OTFT Physics"

Radu Alexandru SporeaUniversity of Surrey (UK)
Chao JiangNational Center for Nanoscience and Technology (China)

Invited Speakers

Prof. Jun Takeya

The University of Tokyo (Japan)

"High-mobility strained organic semiconductor single crystals"

Prof. /Dr. Xiaojun Guo

Shanghai Jiao Tong University (China)

"Improving the Switching Efficiency of Fully-Printable Organic Field Effect Transistors"

Session 8 "Printed OPV"

Tsukasa YoshidaYamagata University (Japan)
Jingbo ZhangTianjin Normal University (China)

Invited Speakers

Prof. Xiao-Feng Wang

Key Laboratory of Physics and Technology for Advanced Batteries, Ministry of Education, College of Physics, Jilin University (China)

"Low-temperature processed metal oxides as electron collection layer for efficient perovskite solar cells"

Dr. Zacharie Jehl

The University of Tokyo (Japan)

"Design of energy selective contacts for hot carrier solar cells"

Session 9 "Flexible Medical Sensors"

Takao SomeyaThe University of Tokyo (Japan)
Naoki MatsudaAIST (Japan)

Invited Speakers

Prof. Dae-Hyeong Kim

Seoul National University (Korea)

"Soft Bioelectronics for Surgical Endoscope and Diabetes Patch"

Prof. Tsuyoshi Sekitani

Osaka University (Japan)

"Ultraflexible organic amplifier with biocompatible gel electrodes"

Session 10 "Conductive & Functional Inks"

Zheng CuiSuzhou Institute of Nanotech (China)
Zijian ZhengThe Hong Kong Polytechnic University (China)

Invited Speakers

Prof. Yanlin Song

Chinese Academy of Sciences (China)

"Green Printing Nano-technology for Manufacturing Photonics and Electronic"

Prof. ⁄ Dr. Jianwen Zhao

Suzhou Institute of Nanotech and Nanobionics, Chinese Academy of Sciences (China)

"Printable functional inks and applications in printed electronics"

Session 11 "Organic Semiconductor Materials"

Kazuo TakimiyaRIKEN (Japan)
Antonio FacchettiPolyera Corporation (USA)

Invited Speakers

Prof. Yen-Ju Cheng

National Chiao Tung University (Taiwan)

"Design and Synthesis of Organic Functional Materials for Solar Cell and Transistor Applications"

Dr. Yutaka Ie

Osaka University (Japan)

"Development of Electron-Transporting π-Conjugated Systems for Organic Semiconducting Materials"

Dr. Prashant Sonar

Queensland University of Technology (Australia)

"Fused Aromatic π-Functional Polymeric Semiconductors for Organic and Printed Electronics"

Session 12 "Inorganic TFT Technology"

Yukiharu UraokaNAIST (Japan)
Mitsuru NakataNHK (Japan)

Invited Speakers

Dr. Radu Alexandru Sporea

University of Surrey (UK)

"Performance uniformity and manufacturability of thin-film source-gated transistors"

Prof. Jae Kyeong Jeong

Hanyang University (Korea)

"Solution Processable Metal Oxide Field-Effect Transistors with Printing Copper Interconnectt"

Dr. Ryoichi Ishihara

Delft University of Technology (the Netherlands)

"Printed Poly-Si on Paper using Liquid-Si for Beyond Plastic

Session 13 "Paper Electronics"

Masaya NogiOsaka University (Japan)
Toshiharu EnomaeTsukuba University (Japan)

Invited Speakers

Prof. Hongli Zhu

Northeastern University (USA)

"Flexible Transparent Nanopaper Electronics"

Mr. Keiichi Kajita

Oji Holdings Co. (Japan)

"Development of Transparent Cellulose Nano Fiber Film for Flexible Displays"

Session 14 "Chemical & Bio Sensors"

Osamu NiwaSaitama Institute of Technology (Japan)
Tsuyoshi MinamiThe University of Tokyo (Japan)

Invited Speakers

Dr. Chao-Min Cheng

National Tsing Hua University (Taiwan)

"Translating fiber-based diagnostic devices into clinically relevant applications"

Prof. Kohji Mitsubayashi

Tokyo Medical and Dental University (Japan)

"Cavitas sensors for bio⁄chemical monitoring : Soft-contact lens & Mouthgurard sensors"

Session 15 "Flexible Substrate & Barriers"

Mitsuhiro KodenYamagata University (Japan)

Invited Speakers

Dr. Tzeng-Yow Lin


Industrial Technology Research Institute, (ITRI) ⁄ Center for Measurement Standards (Taiwan)

"Overview of Taiwan Standards Harmonization on Flexible Displays"

Prof. Kazukiyo Nagai

Meiji University (Japan)

"Gas barrier for encapsulation of flexible and printed electronic devices"

Session 16 "Frontier Energy Devices"

Takao IshidaAIST (Japan)
Satoru KonabeTokyo University of Science (Japan)

Invited Speakers

Dr. Tsuyohiko Fujigaya

Kyushu University (Japan)

“Fabrication of air-stable thermoelectric materials based on single-walled carbon nanotubes”

Dr. Ruoming Tian

Toyota Physical and Chemical Research Institute (Japan)

“Scalable inorganic/organic hybrid film towards flexible thermoelectric modules”

Session 17 "Measurement & Evaluation"

Hiroyoshi NaitoOsaka Prefecture University (Japan)
Furong ZhuHong Kong Baptist University (Hong Kong)

Invited Speakers

Prof. Takaaki Manaka

Tokyo Institute of Technology (Japan)

“Visualization and analysis of carrier behavior in organic semiconductor thin films”

Prof. Ronald Österbacka

Åbo Akademi University (Finland)

“Charge Extraction by a Linearly Increasing Voltage in the Doping-Induced Capacitive Regime”

Session 18 "OE-A: New Technologies and Applications for Printed Electronics"

Klaus HeckerOE-A (Germany)

Invited Speakers

Mr. Stan Farnsworth

Nova Centrix (USA)

"Enabling Printed Electronics : Photonic Curing of Inkjet Printed Conductors"

Dr. Giovanni Nisato

CSEM S.A. (Switzerland)

"Towards next generations OPV: key results of the Sunflower EU project"

Prof. ⁄ Dr. Reinhard R. Baumann


Technische Universität Chemnitz (Germany)

"Inkjet Material Deposition Beyond Color"

Dr. Fabrice Domingues Dos Santos

Arkema - Piezotech (France)

"Electroactive Fluorinated Polymers for Organic Electronics & Haptics"

Session 19 "German Flexible Electronics from Saxony"

Dominik GronarzOrganic Electronics Saxony - OES (Germany)

Invited Speakers

Dr. Stefan Mogck

Fraunhofer Institute for Organic Electronic, Electron Beam and Plasma
Technology FEP (Germany)

"Flexible Substrates for Roll-to-Roll OLED Manufacturing"

Dr. Frederik Nehm

TU Dresden (Germany)

"Climate-Dependent Organic Device Degradation and Moisture Permeation through Flexible Barriers"

Dr. Andreas Willert

Fraunhofer ENAS (Germany)

"Tailoring of Printed Primary Batteries"

Session 20 "Innovative Manufacturing Systems"


Invited Speakers

Dr. Fabrice Domingues Dos Santos

Arkema - Piezotech (France)

"AFELIM building a bridge between science, technology and applications to challenge"

Dr. An-Jung Chung

Korea Printed Electrics Association (Korea)

"KoPEA : Innovation hub of Korea Printed Electronics"

Prof. Stergios Logothetidis

Nanotechnology Lab LTFN, Department of Physics, Aristotle University of Thessaloniki (Greece)

"Unique Roll-to-Roll manufacturing pilot line with laser patterning and in-line optical metrology for quality control for OPVs mass production"

Oral Presentations

1. Flexible & Printed Displays

Dr. Mitsuru Nakata

NHK Science & Technology Research Laboratories (Japan)

"Characterization of Back-Channel-Etched InSnZnO TFTs on Plastic Film and Fabrication of Flexible OLED Displays"

Prof. Jinwei Gao

South China Normal University (China)

"An inexpensive flexible transparent conducting network with record high figure of merit"

Mr. Keigo Takauji

Ricoh Institute of Future Tecknology, RICOH Company, Ltd., (Japan)

"The new electrochromic imaging device for decorative applications"

2. Printed and Flexible Integrated Circuits

Dr. Gari Arutinov

Researcher (Netherlands)

"Photonic processes in printing electronics: printing with light"

Dr. Kengo Nakayama

Technology Research Institute of Osaka Prefecture (Japan)

"Organic Temperature Sensors and Organic Read-Out Circuits"

Prof. Jung Sungjune

Pohang University of Science & Technology (Korea)

"3D Complementary Organic Field-Effect Transistors and Logic Circuits Fabricated by Inkjet-Printing"

Dr. Kuan-Ting Kuo

Corning Research Center Taiwan (Taiwan)

"Flexible Glass as New Substrate for High Frequency Flexible Printed Circuit Board Application"

3. Fine Line Process & Equipment

Dr. Yasuyoshi Mishima

Japan Advanced Printed Electronics Technology Research Association (Japan)

"High precision alignment technology for printed electronics"

Ms. Konami Izumi

Yamagata University (Japan)

"Soft Blanket Gravure Printing Technology for Finely Patterned Layers on Three-Dimensional Curved Surfaces"

Mr. Yasunori Yoshida

Yamagata University (Japan)

"Highly Conductive Metal Interconnects on Three-Dimensional Objects Fabricated with Omnidirectional Ink Jet Printing Technology"

Mr. Naoki Rikita



4. OLED Lighting

Dr. Gerardo Hernandez-Sosa

Karlsruhe Institute of Technology (Germany)

"Solution-Processed Electron Injection Layers for
Printed Organic Light-Emitting Diodes"

Dr. Cheng-Yao Lo

National Tsing Hua University (Taiwan)

"Morphology and Intensity Uniformity Compensation in OLED by Inkjet Printing"

Ms. Ting-An Ku

Graduate Institute of Photonics and Optoelectronics, National Taiwan University (Taiwan)

"Surface Modification of Graphene Using HBC-6ImBr
in Solution-processed OLEDs"

Prof. Hisahiro Sasabe

Yamagata univ. (Japan)

"Realizing low-drive-voltage organic light-emitting devices with high EQE of 30%"

5. Hybrid Integration & Applications

Dr. Jukka-Tapani Makinen

VTT Technical Research Centre of Finland (Finland)

"Roll-to-Roll Hybrid Integration Manufacturing Process"

Mr. Yihao Chen

Tsinghua University (China)

"Biocompatible and Ultra-flexible Inorganic Strain Sensors Attached to Skin for Long-term Vital Signs Monitoring"

Mr. Hiroki Hayata

Waseda University (Japan)

"Development of Inexpensive Skin Adhesive Electronic Device
- RFID Tag Implementation on Ultrathin Polymer Film -"

Dr. Kenji Tsukada

Fuji Machine Mfg. Co., Ltd. (Japan)

"The New 3D Inkjet Printing System forming Micro Circuit Module"

Dr. Daniel Zymelka

N-MEMS Technology Research Organization (Japan)

"Development of printed strain sensors array for application in structural health monitoring"

Mr. Natthapol Watthanawisuth

Assistance Researcher (Thailand)

"Design of Flexible and Transparent Touch Sensor
Based on Inkjet Printed Graphene using Capacitive and Resistive Techniques"

6. R2R Process & Equipment

Prof. Pim Groen

Holst Centre (Netherlands)

"High volume solution based Roll-to-Roll processing of OLEDS"

Mr. Junfeng Sun

Department of Printed Electronics Engineering and Regional Innovation Center for Printed Electronics, Sunchon National University (Korea)

"Fully Roll-to-Roll Gravure Printed TFT-Active Matrix with 40 PPI Resolution"

Mr. Taishi Hitomi

Asahi Kasei Corporation (Japan)

"Film with Sub-micron High Resolution Pattern Printed by 250mm-wide Seamless Roller Mold"

Mr. Keiichi Abe


"Roll to Roll Gravure Offset Press"

7. OTFT Physics

Mr. Jiawei Wang

National Center for Nanoscience and Nanotechnology (China)

"Vertical charge transport within TIPs-Pentacene lamellar single crystal: trap-limited or small polaron hopping?"

Mr. Takamasa Hamai

The University of Tokyo (Japan)

"Interlayer Access Resistance in Single-Crystalline Ultrathin Film of Ph-BTBT-C10"

Mr. Jin-Ho Lee

Pukyong National University (Korea)

"Fabrication of high performance C8-BTBT based OTFTs with Solution-Shearing method"

Dr. Sho Kanesaka

Sumitomo Chemical (Japan)

"Development in Polymer-type Semiconducting Material For Organic Thin Film Transistor"

8. Printed OPV

Prof. Takeshi Sano

Yamagata University (Japan)

"All-vapor-deposited planar heterojunction perovskite solar cells prepared at room-temperature"

Mr. Kai Cheong Tam

Bayerisches Zentrum fuer Angewandte Energieforschung e.V. (Germany)

"Inkjet printed silver nanowire electrodes for visually non-obstructive and efficient organic solar cells and modules"

Prof. Ken-ichi Nakayama

Osaka University (Japan)

"Solution-processed p-i-n organic solar cells via the photoprecursor approach"

Dr. Haibin Wang

The University of Tokyo (Japan)

"Solution Processed Solar Cells Based on PbS Colloidal Quantum Dot / ZnO Nanowire Bulk Heterojunctions"

9. Flexible Medical Sensors

Dr. Hiroaki Takehara

Nara Institute of Science and Technology (Japan)

"Implantable medical LSI-chips integrated with flexible and biocompatible hydrogel optical fibers"

Dr. Hiroyuki Kai

Tohoku University (Japan)

"Porous polymer microneedles toward the efficient interface with skin"

Mr. Tomohito Sekine

Yamagata Univ. (Japan)

"Printed Pressure Sensor for Human Pulse Rate Detecting"

Ms. Ying Chen

Tsinghua University (China)

"Breathable and Stretchable Temperature Sensors Inspired by Skin"

10. Conductive & Functional Inks

Prof. Xingye Zhang

Institute of Chemistry, Chinese Academy of Sciences (China)

"Research on Conductive Inks and Printed Circuits with Industrial Inkjet Printer"

Dr. Peng Li

Center for Advanced Optoelectronic Functional Materials Research, and Key Laboratory for UV-Emitting Materials and Technology of Minis-try of Education, Northeast Normal University (China)

"Wearable and Transparent Heaters Based on Hybrid Structure of Graphene-Aligned Ag Nanowires"

Dr. Shunsuke Sakurai

1Technology Research Association for Single Wall Carbon Nanotube (TASC), 2AIST (Japan)

"Coating process of thick and uniform single-walled carbon nanotubes film utilizing stable and highly-concentrated suspension of the long nanotubes"

Mr. Wanli Li

The Institute of Scientific and Industrial Research, Osaka University (Japan)

"Flexible copper patterns based on a novel copper ink composed of submicron copper particles and copper complexes under low temperature process"

11. Organic Semiconductor Materials

Dr. Koji Nakano

Tokyo University of Agriculture and Technology (Japan)

"Synthesis and Semiconducting Properties of Ladder-type pi-Conjugated Compounds Containing a Benzo[2,1-b:3,4-b']dichalcogenophene Skeleton"

Prof. Yabing Qi

Okinawa Institute of Science and Technology Graduate University (Japan)

"Real-Space Imaging of the Atomic Structure of Organic-Inorganic Perovskite"

12. Inorganic TFT Technology

Mr. Ryutatsu Mizukami

Graduate School of Advanced Sciences of Matter, Hiroshima University (Japan)

"Improvement of transfer yield of single-crystalline silicon films and fabrication of thin-film transistors on polyethylene terephthalate substrate"

Dr. Juan Paolo Bermundo

Nara Institute of Science and Technology (Japan)

"High Mobility a-InGaZnO Thin-film Transistors with Solution-processed Passivation Layer via Irradiation with KrF Excimer Laser"

13. Paper Electronics

Dr. Hirotaka Koga

Osaka University (Japan)

"Reduced Graphene Oxide/Cellulose Paper Composite Electrode Prepared by Papermaking and Flash-Reduction Processes"

Dr. Tithimanan Srimongkon

Flexible Electronics Research Center (FLEC), National Institute of Advanced Industrial Science and Technology (AIST) (Japan)

"Study of the electrical response of culture media during bacterial growth on a paper-based device"

Ms. Nita Samantaray

NA (India)

"Copper Conductive Ink: "An Effective & Alternate Solution for Printed Electronics"

Dr. Martin Busch

Coatema Coating Machinery GmbH (Germany)

"Upscaling and production methods for large area printed electronics and beyond"

14. Chemical & Bio Sensors

Dr. Tsuyoshi Minami

Institute of Industrial Science, the University of Tokyo (Japan)

"Development of an Enzymatic Biosensor based on an Electrolyte-Gated Organic Transistor"

Prof. Isao Shitanda

Tokyo University of Science (Japan)

"Printable Electrochemistry for Paper-based Self-powered Biosensing Devices"

Mr. Chakrit Sriprachuabwong

National Electronics and Computer Technology Center, National Science and Technology Development Agency (Thailand)

"Inkjet Printed Graphene/Au-PEDOT:PSS Layers Modified Electrochemical Sensor for Simultaneous Detection of Ascorbic acid, Dopamine and Uric acid"

Ms. Assawapong Sappat

National Electronics and Computer Technology Center, National Science and Technology Development Agency (Thailand)

"Disposable Screen-printed Graphene-based Electrochemical Sensor and Low-cost Mini-potentiostat for Electrochemical Applications"

Prof. Tatsuro Goda

Tokyo Medical and Dental University (Japan)

"Zwitterionic Phosphorylcholine-Tethered Polythiophenes for Electrochemical Detection of Acute-Phase Biomarker"

15. Flexible Substrate & Barriers

Dr. Pavel Kudlacek

Holst Centre/TNO (Netherlands)

"Towards high-volume production of ultra-moisture barrier films"

Dr. Akira Suzuki

Chemical Materials Evaluation and Research Base (Japan)

"Reliable water vapor barrier evaluation technique for high barrier films in flexible organic electronics"

Dr. Hannes Klumbies

FHR Anlagenbau GmbH (Germany)

"AVOTouch - Roll-to-Roll Web Processing Without Touching the Layer Side"

Prof. Tadahiro Furukawa

Yamagata University (Japan)

"Novel ITO Fabrication Processes on Ultra-thin Glass"

16. Frontier Energy Devices

Mr. Pandiyarasan Veluswamy

National University Corporation Shizuoka University (Japan)

"Solvothermal growth of monodispersed ZnO nanostructures on carbon fabric for flexible thermoelectric applications"

Dr. Shun Watanabe

PRESTO, JST and Department of Advanced Materials Science, The University of Tokyo (Japan)

"A New Class of Conducting Polymers Based on Molecular Implantation; Toward High Performance Thermoelectric Power Generators"

Mr. Wei Li

Tokyo Institute of Technology (Japan)

"Carbazole-EDOT Copolymers as Hole-Transporting Materials for Perovskite Solar Cells"

17. Measurement & Evaluation

Dr. Jun'ya Tsutsumi

National Institute of Advanced Industrial Science and Technology (AIST) (Japan)

"Visualization and Mass Inspection for Thin Film Transistor Array Operations Using Gate-Modulation Imaging"

Mr. Yohei Uemura

The University of Tokyo (Japan)

"Ferroelectric Field Modulation Imaging of Organic Ferroelectric Thin Films"

Mr. Mikio Sato

Tokyo University of Science (Japan)

"Observation of electronic structure at organic/MoOx interface"

Dr. Yoshida Hajime

AIST (Japan)

"Gas barrier characteristics of standard gas barrier films fabricated by clay-polymer nanocomposite film Claist"

18. OE-A: New Technologies and Applications for Printed Electronics

Dr. Francesco Pastorelli

DTU (Denmark)

"Roll-to-Roll Printed Transistors with High Current Characteristics and Thermal Tunability for Standalone Applications"

19. German Flexible Electronics from Saxony

Dr. Jens Drechsel

Creaphys GmbH (Germany)

"QUANTIpure®: Scalable Purification for High Quality Small Molecular Compounds"

Dr. Carsten Deus

VON ARDENNE GmbH (Germany)

"Equipment and technology for flexible and organic electronics manufacturing in S2S and R2R: PVD tools, flash lamp annealing, flexible glass"

20. Innovative Manufacturing Systems

Prof. Stergios Logothetidis

Aristotle University of Thessaloniki (Greece)

"Enabling Manufacturing of Printed Electronics: Hellenic Organic & Printed Electronics Association Hellas (HOPE-A).​"

Mr. Naoki Rikita


"Slot Die Material Innovations, Tungsten Carbide"

Organized by

2016 ICFPE Organizing Committee


Conference Secretariat
c/o JTB Communication Design, Inc. (former ICS Convention Design, Inc.)
*Contact information has been changed from April, 2016.